Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Wahoo Blue SC Speed/Cadence Sensor (BT/ANT+)
$69.99
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
CycleOps BlueGiga USB Dongle
$29.99
The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
Wahoo KICKR HEADWIND Smart Fan
$249.99
The KICKR HEADWIND is the first ever smart fan, designed with the cyclist in mind. Its Targeted Airflow Pattern mirrors the shape and position of a cyclist's body while riding. The KICKR HEADWIND is sensor controlled so as your speed or heart rate increases, so will the fan speed, and there are also 4 manual speed settings should you want to set your own ideal airflow. With speeds of over 30 mph (48 kph), the KICKR HEADWIND will keep you cool during the toughest training sessions. - With wind speeds topping out at over 30 mph the KICKR HEADWIND will keep you cool during your hardest efforts. - The Targeted Airflow Pattern of the KICKR HEADWIND is designed to mirror the shape and position of a cyclist's body while riding on a bicycle. - Control the speed of your KICKR HEADWIND by pairing your ANT+ speed sensor, heart rate monitor, or smart trainer directly to the fan. As your speed or heart rate increases so will the fan speed. - Pair to the Wahoo App via Bluetooth for easy fan speed control at your fingertips. - Control the KICKR HEADWIND with a simple press of a button. Four (4) preprogrammed fan speeds allow you to select your ideal airflow. - The KICKR HEADWIND was specially designed to fit with the KICKR DESK. The wheels on the KICKR HEADWIND allow you to roll the fan into position when it is attached to your KICKR DESK.
Lezyne GPS O-Ring Set
$3.99
Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size
Campagnolo EPS V2 and V3 Power Unit Charger
$125.00
- Required for charging Campagnolo V2 and V3 Power Units - Not compatible with Campagnolo V1 Power Unit
SRAM eTAP Powerpack
$77.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).
Profile Design UCM Universal Computer Mount 25mm
$9.99
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design UCM XL Universal Computer Mount 60mm
$10.99
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
SRAM eTap BlipClamp
$16.00
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
Specialized Turbo Vado Stem w/Display & Light Mount
$65.00
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.
XLAB Aero Computer Mount Gen 2
$15.95
With aerobars, short stems and hydration systems crowding the front end of your bike, it's hard to mount a computer. But, with Xlab's Aero Computer Mount Gen 2 you can mount your computer to your stem cap! It's aero because it fits neatly behind aero drink systems and horizontally mounted bottles, and the extra height of the mount makes your computer easier to read. It can also be mounted on the Xlab Torpedo Mini Mount, placing your computer in front in your line of sight. • The Aero Computer Mount, re-designed! Aerodynamically designed and longer to support larger screen computers • Mount in front of Torpedo Systems or on stem bolt • Helps reduce drag from a computer mount with one that was designed with aerodynamics in mind • Mount in front of TORPEDO SYSTEM (sold separately) for optimum viewing. • Mount on stem when using non-XLAB drink systems (sold separately) • Easy to read when in aero position • Fits most computers including the new longer form factor models (sold separately) • Mount is 37 mm wide. Plenty of room to support the popular Garmin computers (sold separately) • Includes hardware and instructions • Weight: 29.5 grams
K-Edge Go Big Pro Handlebar Mount for GoPro
$59.99
- CNC-machined professional grade aluminum camera mounts for Go Pro cameras - Lock the camera case on to either your handlebars or seat rails depending on model - Greatly reduces camera shudder and improves video images - Powerful clamping via all metal bolt/mount system for 31.8mm diameter handlebars on handlebar mounts - 1/4" mount provides a solid platform for any camera that has a standard 1/4" interface - Lifetime warranty, made in the USA
K-Edge Go Big Pro Handlebar Mount
$29.99
The new Go Big Pro is the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. Key Features and Benefits: - STRONG – CNC machined aluminum mount engineered to hold your camera securely in place no matter the terrain. - STABLE – High quality video footage with a solid platform to prevent shake you would get from a plastic option. - POSITION – Out front and low, the ideal location for mounting from the bars and the most popular position for on-bike footage. - EASY – Hinged handlebar clamp for ease of installation and removal. Simple 1-bolt hinged clamping system, quick and easy. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. Any action camera utilizing the GoPro interface. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
K-Edge Go Big On-Center Mount
$39.99 - $44.99
The new Go Big On-Center Mount the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. On-Center give you a better framed image with the newer style cameras that have lenses centered on the camera, such as the GoPro Session and Garmin VIRB. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm and 35mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
Delta Tablet Extension Arm For Handlebars
$19.99
Extension Arm holds tablets at comfortable viewing distance. - For use with trainers and spin bikes only - Compatible with all Delta Tablet Holders (sold separately) - Premium aluminum construction - Instant attachment and removal - Rubber coated to protect stem and bars
MSW Cadence Sensor Magnet
$4.99
Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.
ENVE Wahoo Computer Mount Insert
$5.00
What It Is Wahoo insert for an existing ENVE Computer mount. Who It's For Wahooligans, as Wahoo owners affectionately call themselves. Those who want to run ENVE's stem and computer mounting system, but own a Wahoo computer, now have an option. Why We Made It Data is what we crave in every aspect of what we do. Numbers, stats, KOMs – we want to collect them all, just like you. We also recognize that not everyone has the same computer. Providing options for all different types of computers was a simple solution. Wahooligans celebrate — ENVE is now compatible. - Computer mount sold separately
Sigma Sport STS Cadence Transmitter
$29.99
STS Cadence transmitter for all wireless cadence equipped Sigma bicycle computers. Can be installed with o-rings or zip ties and has an adjustable pivot point to allow for more customizable installation options. Includes pedal insert cadence magnet that can be attached to the pedal for low clearance installations or use the included plastic insert for non-magnetic pedals. Compatible models: Topline 2009: - BC 1609 STS - BC 2209 MHR - BC 1909 HR - BC 2209 Targa Topline 2012: - BC 16.12 STS - BC 12.12 STS - ROX 5.0 - ROX 6.0 - ROX 8.0 - ROX 8.1 - ROX 9.0 - ROX 9.1 Topline 2016: - BC 14.16 STS - BC 16.16 STS
Rokform Pro Series Bike Mount Kit
$99.99
BEYOND PROTECTION Don't risk having your phone fall out of your pocket on the road or trails! The Rokform Pro Series Bike Mount features a dual retention lock system which encompasses both quarter turn RokLock mounting technology, as well as the guaranteed RokSafe magnet mountability. Just in case that's not enough, attach your Rokform wrist lanyard that's included with every case, and wrap it around your bike mount for an added layer of protection. YOUR WORLD AT YOUR FINGERTIPS When you ride with the aluminum iPhone bike mount, you will have easy access and a clear view of your device while you ride. Keep your navigation in view, but out of the way, throughout your next ride. Enjoy easy access to your favorite cycling apps like Strava, and total control of your favorite playlists. You'll always be able to screen your calls and texts so you only have to pull over for the very important ones. SLEEK STYLE Many riders are very passionate about the look and feel of their bike. Unfortunately, most Bike Mounts on the market are bulky and obstruct your handlebars, or can be cheaply made with zip ties and rubber bands, which can take away from the overall aesthetic of your bike. The Rokform iPhone 6/6s Pro Series Bike Mount Kit is the solution to this problem. Best of all? The Rokform Bike Mount's slim and sleek design fits nicely to the stem of your bike, so you'll never have to compromise in quality or looks. UNPARALLELED ADJUSTABILITY Everyone has their own unique style and tastes. When you ride with the Rokform Pro Series Bike Mount, you always have options to customize your ride, to suit your taste. Why settle for a immobile bike mount, when you can ride with the highly adjustable Rokform Pro Series Bike Mount? With a range of motion that allows you to tilt your Bike Mount and phone from -20 to +55 Degrees, you can always have the perfect view of your screen. SUPERIOR STRENGTH - EXTREMELY LIGHTWEIGHT The Rokform Pro Series Bike Mount is built strong, to withstand daily use and abuses, while always looking great and performing outstandingly. CNC Machined from 6061 T-6 aircraft grade aluminum, the pro series Apple iPhone bike mount by Rokform is feather-light and weighs less than 1 ounce. Not only will it never weigh your bike down, you will always ride assured that you have a trustworthy product, made of only the highest quality and toughest materials, holding your device in place. UNIVERSAL The Rokform iPhone Pro Series Bike Mount replaces the top cap of your bike's 1-1/8" threadless steer tube. Includes: -Rokform Pro Series Bike Mount -Rugged Case -Water Resistant Skin -Rokform Detachable Lanyard
K-Edge Go Big Thumb Screw
$9.99
Hand tight adjustability and 4mm hex wrench lockable. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Combo Mounts, Light&Camera Mounts. - Aluminum knurled thumbscrew - Stainless Steel bolt with 4MM hex feature - Weight: 10g - Anodized Color: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded
Specialized Power Cranks Battery Cover Kit
$10.00
Kit containing all replaceable items for the Specialized power meter pod. - White silicone O-ring. - Two M3x5 stainless steel screws.
Garmin Bike Cadence Sensor Replacement Bands
$4.99
Garmin's set of Bike Cadence Sensor Replacement Bands fasten your Bike Cadence Sensor (sold separately) to any size crank arm.
Garmin Quarter Turn Bike Mount
$9.99
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
K-Edge CatEye TT Mount
$49.99
The ultimate upgrade for your CatEye Computer. The time trial and triathlon are all about being aero and staying in this position. This K-EDGE mount helps with both by positioning the CatEye computer between narrow aerobars, out of the way of the rider’s arms and in the ideal viewing position. The aluminum mount uses CatEye’s own locking insert for rock solid security. - CNC Machined 6061-T6 Aluminum - Compatible: 22.2mm diameter handlebars, 100% carbon bar safe - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - CatEye compatible / replaceable locking interface (see list below for Cateye Compatible Products) - CC-RD500B “Strada Smart” - CC-GL51 “Stealth Evo+” - CC-GL50 “Stealth 50” - CC-GL11 “Stealth Evo” - CC-GL10 “Stealth 10” - CC-RD430DW “Strada Digital Wireless” - CC-RD420DW “Strada Digital Wireless” - CC-RD410DW “Strada Digital Wireless” - CC-RD400DW Strada Double Wireless” - CC-AT200W “Adventure” - CC-PD100W “Fit” - CC-RD310W “Strada Slim” - CC-RD310W “Strada Wireless Universal” - CC-RD300W “Strada Wireless” - CC-MC200W “Micro Wireless” - CC-COM10W “Commuter” - CC-PA100W “Padrone” - CC-VT200W “Velo Wireless” - CC-VT210W “Velo Wireless+” - CC-VT220W “Urban Wireless”
Garmin Bike Speed Sensor
$39.99
Monitor your speed as you ride with Garmin's easy-to-install wireless sensor. The speed sensor attaches to the hub of either wheel and self-calibrates with your Garmin device to give you accurate speed and distance at all times, including indoors on the trainer. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain, and move between bikes.
Garmin Bicycle Mount Kit
$14.99
Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.
Garmin Edge Slide-In Bike Mount
$19.99
Secure your Edge to the handlebar of your bike with Garmin's Slide-In Bike Mount. Zip ties are included.
Garmin Silicone Case (Edge 820)
$14.99 - $24.99
Protect your Garmin Edge 820 (sold separately) with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
Garmin Silicone Case (Edge 1030)
$19.99
Protect your Edge 1030 with this form-fitting, removable silicone case.
Shimano BT-R1A External Di2 Battery
$77.99
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Page 1 of 5 Next page