Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 3ZERO MOTO 29-inch Rear
$1,022.00 - $1,049.00
Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty
Stan's NoTubes Presta Removeable Valve Core
$2.99
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
ENVE AM30 29-inch Wheelset
$1,749.99
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology
Zipp 11-Speed Freehub Kit for 2013 - Current 188 Hub
$139.99
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Muc-Off V2 Tubeless Valve Kit
$29.99
V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts. - 7075 Machined Aluminum valve stem and cap - Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts - 4mm machined Allen Key slot for easy installation and removal - Includes Valve Core Removal Tool (integrated into spare alloy cap) - Supplied with various rubber bases to optimize fit with multiple rim types
Stan's NoTubes Crest MK4 29-inch Front Wheel
$324.99
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
Muc-Off Tubeless Valve Kit
$29.99 - $34.99
Suitable for both mountain and road applications. - Includes 2 x Tubeless Valves, 2 x Narrow Round Bases, 2 x Wider Round Bases, and 2 x Square bases to fit different rim profiles, Spare Alloy Valve cap with integrated valve core remover - Installs securely with a 4mm fitting for a hex wrench of the valve and a 10mm wrench flat on the nut
Quality Wheels SRAM 406 6-bolt / Sun SR25 29-inch Rear
$109.00
Our best value in Quick-release disc wheels.
The Wheel Shop Alex DM-18/Shimano Acera HB-T3000 700c Front
$64.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano Acera HB-T3000 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes
Sta-Tru 16-inch Front Wheel
$39.99
Sta Tru Front Wheel - Hub/Brake Compatibility: Rim Brake - Wheel Size: 16-inch - ISO Diameter: 305 / 16-inch - Front Axle: 3/8-inch x 100mm - Tire Type: Clincher
Enduro Max
$6.70 - $14.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
Wheel Shop Single Wall 20-inch Alloy Rim Rear
$44.99
- RIM: Alex alloy - SPOKES: Steel
Wolf Tooth Components Rear Thru Axle
$12.00 - $39.95
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards
Stan's NoTubes Tubeless Valve Stems
$15.99 - $19.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Stan's NoTubes Arch S1
$278.99 - $299.99
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Wahoo KICKR SNAP 142 x 12mm Thru Axle Adapter
$79.99
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap
Wheels Manufacturing Inc. Outer Axle Nut
$1.99 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
ENVE SES 3.4 Disc ENVE Alloy Hub Wheelset
$2,550.00
ENVE's most well-rounded road wheelset, the SES 3.4 is a climber with an aero edge. It's just the right depth to cover steep grades at speed. Since its introduction in 2009, the Smart ENVE System 3.4 has established itself as ENVE's most versatile and consequently most popular carbon fiber aero road wheelset amongst road cyclists of all abilities. The new SES 3.4 is wider than its predecessor (27.5mm wide external, 21mm internal) to improve rolling resistance and improve aerodynamics for use with 25mm tires and is available in both rim and disc brake models. In addition to added width, the versatile and reliable nature of the SES 3.4 has been augmented by incorporating road tubeless tire compatibility. Road tubeless compatibility means improved rolling resistance, comfort, traction, and a reduced propensity for flat tires. Like all SES models, the SES 3.4 features dissimilar rim shapes and geometries between front and back wheels to maximize aerodynamic efficiency and rideability in variable weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while the rear rim is 42mm deep and therefore improves overall airflow attachment. - Intended Use: Road - Inner Rim Width: 21mm - Aero Optimized Tire Size: 25c - Rim and Disc Brake Models Available - Tubeless Optimized; Tube Compatible DISC BRAKE TECHNOLOGIES GO FAST; STOP FAST: The SES 3.4 Disc features a disc brake-specific carbon fiber rim design. In other words, this is not simply a rim brake model with no brake track. Each SES Disc rim features a disc brake-specific laminate to ensure optimal performance on disc brake-equipped road, cyclocross, and triathlon bicycles. As a result of disc brake-specific engineering the SES 3.4 Disc is substantially lighter than its rim-brake counterpart but equally as stiff and impact resistant. This is accomplished because we are able to deploy the carbon fiber that previously served the requirements for heat management to now serve the requirements for stiffness and durability. Need to know: - Disc-specific construction with no brake tracks - Rims are lighter by 40-60g per rim - Impact resistance increased - Greater lateral stiffness TUBELESS COMPATIBLE SPEED, COMFORT, PROTECTION: Greater speed, comfort, grip and puncture resistance – what's not to like about road tubeless? With the selection of a high performance tire at the right pressure, you can achieve lower rolling resistance and more speed. Tubeless also allows you to run much lower tire pressures for far greater comfort, traction, and efficiency, especially over poor road surfaces and gravel, all without sacrificing speed. The potential for pinch flats and, with sealant, debris punctures is all but eliminated. ENVE recognized early that road tubeless technology is here to stay and we drew on our years of experience making the world's best mountain bike wheels to optimize the SES range for tubeless (excluding the current SES 4.5). With rims going wider and frames giving more tire clearance, the key aspects of bike design were aligned to make tubeless the best choice: wider rims make it easier to mount tubeless tires. Disc brakes add even more benefits for tubeless, typically allowing larger tires as well as removing issues of heat at the rim. Need to know: - Tubeless optimized design - Faster rolling - Higher grip - Greater comfort - Outstanding puncture resistance
Robert Axle Project Trainer Thru Axle
$54.00 - $69.99
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Shimano Alfine S700 Small Parts Kit
$24.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Zipp 3ZERO MOTO Carbon Tubeless 29-inch Rear
$1,049.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Zipp 3ZERO MOTO Carbon Tubeless 29-inch Front
$950.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
DT Swiss Aluminum Tubeless Valve
$14.99
Aluminum Tubeless Presta Valve - MTB or Road
Shimano Dura-Ace 9000 Quick Release
$64.99
Shimano Dura-Ace 9000 Hub Quick Release Skewer. - Axle Type: Standard QR
Sta-Tru 20-inch Steel Rim Front Wheel
$44.99
Sta Tru Front Wheel - Steel rim - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Rim Width (Internal): 24 mm - Tire Type: Clincher
Stan's NoTubes Flow MK3 26 Front Wheel
$319.99
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
Mavic Ksyrium Elite UST Disc Front
$338.00
A favorite for everyday road training and racing, this versatile wheel system produces a lightweight, dynamic ride quality that now has the added benefits of our UST Road Tubeless technology. This patented system provides seamless integration between the wheel and our new Yksion Pro UST tubeless tires that makes installation, removal, and maintenance easier than ever. You get all the benefits of tubeless, including less rolling resistance and a smoother, more controlled ride quality. Without tubes, you can run lower tire pressure with no risk of pinch flats, and the sealant helps prevent punctures. The rims are engineered using our ISM 4D technology and a wider design (19mm internal/23mm external). ISM stands for Inter Spoke Milling, a unique process that trims the thickness of the rim wall between the spokes to create a rim that's lighter but still very durable. Roll faster and smoother with a reduced risk of punctures - With UST Road Tubeless, no tube means no friction, so you experience less rolling resistance and higher speeds. - UST Road Tubeless lets you ride with lower tire pressure for a smoother ride and a reduced risk of punctures. - Our patented UST system offers a perfect union between tire and wheel, so installation, removal, and maintenance are easy. Climb, accelerate, and sprint faster - 17mm internal rim width increases air volume. - ISM 4D superlight rim - Double-butted steel spokes keep the weight down for a fast and comfortable ride. Powerful, reliable disc brakes for more confidence and control - 24 spokes front and rear for optimized brake torque distribution - Front hub convertible from 12mm or 15mm thru-axle to quick release.
SRAM XD Driver Freehub Body for 746 Rear Hub
$79.99
- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap
SRAM Roam 40 Rear Wheel (27.5-inch)
$374.00
Wherever the trail leads, SRAM's Roam 40 wheel is ready to go. The 25mm wide rims give big tires the support they deserve for outstanding cornering control, and the rims are durable enough for day-after-day sessions, yet light enough for race day. Stomp on the pedals and feel the excellent 4 pawl DoubleTime hub with 52 points of engagement. Ditch the tubes with the full UST compatibility to reap the rewards of excellent traction, control, and fewer flats. And, the Roams' great features continue with the Solo Spoke design that uses one spoke length to fit the entire wheel. This rear wheel comes with a quick release and 12mm thru-axle end caps that can be interchanged without tools.
Stan's NoTubes Neo Durasync Freehub
$80.00 - $99.99
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
Page 1 of 5 Next page